Applying our DIY secondary double glazing kit is the quickest and easiest way to install secondary glazing or flyscreens yourself, all you need is scissors and a tape measure*.

The standard kit contains:

• 30m of magnetic tape (12.7mm x 1.5mm) with white foam adhesive
• 30m of white steel tape (13mm x 0.2mm) with acrylic adhesive

• 30m of magnetic tape (25.4mm x 1.5mm) with white foam adhesive
• 30m of white steel tape (25mm x 0.2mm) with acrylic adhesive

To install your secondary glazing or flyscreen cut the magnetic tape and steel tape to size. Stick the steel to the window frame and the magnetic strip to the plastic sheet or flyscreen. Allow 24 hours for the adhesive to completely dry and then your secondary glazing can be quickly and easily slotted into place.

The steel is supplied painted white so it isn’t obviously visible on white window frames. The magnetic tape has a white foam adhesive backing so appears white when stuck to the clear plastic sheet.

Benefits

• quick and easy to apply
• low cost
• reduced heating bills
• easily removed for cleaning or the summer
• the steel is supplied white but could be painted to match your frame if required.
  
  *The plastic sheet or flyscreen must be sourced separately.